HOT3D printer Upgrade KIT Titan AQUA Water Cooling Kit for E3D Hotend Titan Extruder for TEVO Cyclo
[32888175838] Note that the red wire must be connected to the positive electrode, and the black wire to the negative electrode. Otherwise, the fan and pump will be burned out. Titan AQUA Water Cooling Kit for DIY 3D printer for E3D Hotend Titan Extruder for TEVO 3D printer Upgrade Kit. Trianglelab Titan Aqua is a two-in-one water-cooled HotEnd and Extruder.It's quiet,efficient,and all-metal so that you can print at the highest of temperatures.Aqua has been designed alongside our Water-Cooling Kit for use in warm and heated chambers where air-cooling is less effective,and effectively cools both its heat sink and extruder simultaneously. Water-Cooling:The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do.This kit contains everything you need to upgrade your printer for water-cooling. 01.Fan Cooling We've reached the limits of what's possible with HotEnd fans mounted on the print-head.This combination fan and radiator is much larger and more efficient than what's achievable with air-cooling systems.This also makes it quieter,and very low-vibration. 02.Easy to use By limiting the number of parts,we've made this kit easier to use than any water-cooling system we've seen for 3D printing before.The parts fit together snugly,and have been designed for neat and ergonomic building. 03.Adaptable Our kit design is based on standard computer cooling components,allowing users to adapt and expand on the kit as they wish,to cool additional HotEnds or even motors and extruders inside the print envelope.With 4mm outer diameter/3mm inner diameter silicone tubing,it's also compatible with most water cooling systems. 04.Water-Based This kit can be used with any water-based coolant from Purified H2O to popular UV-toned brands. .
US $68.88Grab Now 15% US $58.55
Tidak ada komentar:
Posting Komentar